Skip to main content

Porsche Piwis Tester II with CF30 Laptop $4380



Porsche Piwis Tester II with CF30 Laptop

This is most poweful diagnose and offline programming tool for Porsche. Support key programming. If you want online programming, the cost is 105USD per time.
Covers Porsche’s vehicle lists to the whole year of 2013’s
Functions:
1.Read/clear error code, catch data stream, computer programming match,component test,maintenance information consult, components site drawing, wiring diagram.
2.The piwis tester ii work with the old and latest porsche car. It is equiped with the panasonic laptop and original software for the test. Porsche piwis tester II can help you diagnose and programme the most new and old kind of porsche cars. For example: 911(997), Boxster/ Cayman,(987), Cayenne up to MY 2013, Cayenne from MY 2013 and Panamera
3.The new Panamera can only be diagnosed by using this Porsche PIWIS Tester-II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new PIWIS Tester-II by the end of 2010. PIWIS Tester-I must be used for older models in the Porsche workshop until end of 2010.
4.Support for PIWIS Tester-I will no longer be available once the earlier diagnostic programs have been transferred to PIWIS Tester-II.
5.When the PIWIS Tester-II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Functions:
Read/clear error code, catch data stream, computer programming match,
component test, maintenance information consult, components site drawing, wiring diagram.

Our advantage:
1.Our price is very competitive advantage
2.Our computer is the latest(CF-30C)
3.The pc interface with porsche image
4.support full language and 90 days time unlock
5.support all porsche cars
6.software update by CD and Hard disk

Packages:
1 OBD - II cable
2 USB cable
3 USB tieline
4 Good quality aluminum box
5 English operation specification
6 CF - 30C charger (Optional)
7 CF 30C computer  including touch pen(Optional)
8.Dell E6530 Laptop with software preinstalled (Optional)

Languages:
English
Japanese
Chinese
Francais
Italiano
Espanol
Pyccknn

NOTICE:
Software will never expire!!
Update: by CD or HDD, one year for free, can not update online. 200usd for one time after one year.
Q: How to accomplish Porsche Piwis Tester II online function?
A: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q: How to handle with 90 days locking about Porsche Piwis Tester II?
A: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q: How much software update charges for per year?
A: The first year software update fee is free.

Q: How to update ?
A: By CD or HDD .

Q: What is the current software version for Porsche Piwis Tester II?
A: Version 12.100 Covers Porsche’s vehicle lists to the whole year of 2013’s.

Q: If License area showing China or CN?
A: The License Area does not show China or CN.

Q: If there is manual available?
A: Yes. Provide electronic English manual for free. Please e-mail us to obtain it.

Q: If it is showing Porsche Logo when booting computer?
A: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q: What languages are available for Porsche Piwis Tester II?
A: Language availability: German, British English, American English, French, Italian, Spanish,Japanese, Chinese, Russian, Portuguese, and Dutch.

Q: License Validity?
A: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.
Requires ONLINE modules: (F BCM R BCM DME ELV SRS KEY)

For more information on Porsche Piwis Tester 2 :

Comments

Popular posts from this blog

How to Solve VW Amarok Caddy 2018+ Remote Not Working After Programming

Here comes the general problem of VW Amarok Caddy etc. 2018+ UDS protocol vehicles: 2019 VW Caddy. I spent a few hours programming the Xhorse key using VVDI2 . Also tried TDB1000. Remote function could not be obtained. Every time the programming failed, the original remote stopped working until I scanned and cleared errors. I expected it to work when the transponder was added (Megamos AES). I can’t access remote learning with any of my tools, nor did vvdi2 let me program the remote. I was wondering if anyone could confirm remote learning with transponders or how to learn it if not. Solution: It is not possible for BH remote controls after 2018 at the latest. You will not get any communication with the central locking remote control customization. You need a dealer key 100% and then learn from ODIS. There is no after-market solution, VAG blocked the remote channel on UDS vehicles 2018+. Had the exact same issues with new caddies. So merchant key and Odis ATM since the c...

How Does a Car Code Reader Work?

Computer controls started to show up on cars in the late 1970s and early 1980s, and these systems rapidly grew in complexity. Even very early computer controls included basic “on board diagnostic” functionality, and these early, OEM-specific systems are collectively referred to as OBD-I. In 1995, for the 1996 model year, automakers around the world started transitioning toward the universal OBD-II standard, which has been in use ever since. Both OBD-I and OBD-II systems work in essentially the same way, in that they monitor a variety of sensor inputs and outputs. If the system determines that anything is out of spec, it sets a “ Auto Scanner Tools ” that can be used in diagnostic procedures. Each code corresponds to a specific fault, and there are also different types of codes (i.e. hard, soft) that represent both ongoing and intermittent problems. When a trouble code is set, a special indicator on the dashboard typically lights up. This is the “malfunction indicator lamp” and it essen...

John Deere Service Advisor 4.2 CF – Construction & Forestry incl. Hitachi + History DVD 2016

John Deere Service Advisor  4.2 CF – Construction & Forestry incl. Hitachi 2/2016 contains detailed information on all the procedures for repair and maintenance, a lot of illustrations, wiring diagrams, electrical and hydraulic circuits for construction and forestry equipment John Deere. Service Advisor contains information about setting up data, troubleshooting procedures, symptoms of malfunctions, the order of disassembly and assembly, adjustment data, torque. Electronic program is designed to handle all maintenance issues, eliminate breakdowns and malfunctions. Installation of this software is very easy and doesn’t require additional knowledge. The program allows you to quickly and easily find information and solve problems with machinery John Deere. This service advisor is designed to work with Windows XP, 7, 8. This software works under Windows 10 but wasn’t tested with EDL adapter and drivers. This version of Service Advisor has built-in hot...