Skip to main content

The ATEQ VT55 OBDII TPMS DecoderActivator Reprograms Asian And European Vehicles

ATEQ Corporation introduces another innovative product that will make professional TPMS service quick and easy.
12-1
For vehicles requiring an OBDII relearn, ATEQ’s VT55 OBDII kit includes a universal OBD connector which interfaces with the vehicle’s ECU via CAN bus or K-line. Service technicians only have to select the make of the vehicle, trigger the tire sensors and transfer the IDs, says the company.
In addition to all U.S.-manufactured vehicles, the ATEQ VT55 OBDII reprograms Asian or European vehicles (including Toyota, Honda, Nissan, Hyundai, Kia, Subaru, etc.), which do not feature a TPMS “learn mode.” It’s just that easy and fast to accurately activate and decode TPMS sensors, and display data or any sensor faults.
Training is not needed as the entire step-by-step process is displayed on the large, easy-to-read screen. Even the newest technician can use the VT55 OBDII Kit right out of the box.
The ATEQ VT55 is a continuously evolving tool thanks to software updates adding functionality, features and user-friendliness while keeping the same hardware. There’s no need to buy a new tool because there are new sensors on the market or new features available.
Everything needed to get started and complete service is included in a convenient, heavy-duty case: the VT 55 OBDII tool, USB cables, PC Driver, software and instruction booklet.
ATEQ VT55 Specifications:
● Power Supply: Li-Ion rechargeable batteries with charger featuring low battery status.
● Displays: Depending on the information transmitted by the sensor, the VT55 will display sensor ID, pressure, battery state, temperature and accelerometer information.
● Indicators: LEDs: low battery, transmission, PASS and FAIL. Buzzer.
● Radio Reception: 2 frequencies: 315 MHz and 433.92 MHz. The VT55 can also test a RF Remote Keyless Entry system.
● Weight: 250 g (8.82 ounces).
● Size (HxWxD): 150 (5.91″) x 80 (3.15″) x 25 (0.98″)
● Connectivity: USB port with included USB cable, PC driver and software.
● New Sensor Upgrades: Free for one year.
For more information about ATEQ TPMS tools, contact Eri Muca at sales@obd2tool.com or visit www.obd2tool.com.

https://972447.members.page4.me/_blog/2017/12/04/15-the-ateq-vt55-obdii-tpms-decoderactivator-reprograms-asian-and-european-vehicles/

Comments

Popular posts from this blog

Solved BMW ISTA error IFH-0010, Vehicle could not be identified

This blog list 3 kinds of  bmw diagnostic scanner ISTA errors and solutions you may need. ISTA NCS error IFH-0010+ solution ISTA error”MSVCP120.dll is missing”+ solution ISTA error “The vehicle could not be identified”+ solution Note: All error solutions here are suitable for  BMW ICOM A2 and BMW ICOM Next ! ISTA error IFH-0010: DATATRANSMISSION TO CONTROLUNIT DISTURBED ISTA error: A communication fault occurred during activation Incorrect state: ERROR ECU CONDITIONS NOT CORRECT OR REQUEST SEQUENCE ERROR Solution: Try setting COM port latency to 1 in Advanced Settings for the port. You should change it to 1 to have the least lag/disturbances between data transfer. BMW ISTA System error “MSVCP120.dll is missing” The program can’t start because MSVCP120.dll is missing from your computer. Solution: Reinstall VC++ Redistributables and try again. If you’re running x64, you will need both x86 and x64 bit versions installed. Feedback: I got rid o...

How to Solve VW Amarok Caddy 2018+ Remote Not Working After Programming

Here comes the general problem of VW Amarok Caddy etc. 2018+ UDS protocol vehicles: 2019 VW Caddy. I spent a few hours programming the Xhorse key using VVDI2 . Also tried TDB1000. Remote function could not be obtained. Every time the programming failed, the original remote stopped working until I scanned and cleared errors. I expected it to work when the transponder was added (Megamos AES). I can’t access remote learning with any of my tools, nor did vvdi2 let me program the remote. I was wondering if anyone could confirm remote learning with transponders or how to learn it if not. Solution: It is not possible for BH remote controls after 2018 at the latest. You will not get any communication with the central locking remote control customization. You need a dealer key 100% and then learn from ODIS. There is no after-market solution, VAG blocked the remote channel on UDS vehicles 2018+. Had the exact same issues with new caddies. So merchant key and Odis ATM since the c...

VAG OBD Helper Software

VAG OBD helper 4th Immo Data Calculator free download source and installation guide. VAG OBD helper free download source: https://mega.nz/#!gZJzTKTC!BTVJqa-SmWgrwbd-n0vV8r2glx23d3l2OpN3ZRu1gXU Download the above link on the desktop. Decompress it. Install the driver firstly, then use the USB port to connect the device. Open the software, you will see the serial number read by the cable, the language is Chinese and English. There are some pdf files in Chinese on how to use VAG OBD helper to read out the 4th IMMO data and then use the key programmer to program key. VAG OBD helper Token: Each time the user read out the IMMO data, it will cost one token. Usually the VAG OBD helper comes with one free token FROM www.obd2tool.com , after it use up, just send the supplier serial number to charge more.