Updated Device: Lonsdor K518ISE
Updated Condition: for all K518 devices with working normally
Updated Content: Added Hibernation function; Kernel update supported
Update Benefit: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in hot summer.
Updated Version: K518 APK V1.5.25
Preparation for Update:
1.Power on the device or keep the battery level over 80%.
2.Make sure wifi network is in good condition and the device receives signal normally
Update steps:
1.Click [One key update] and skip to below Auto Key Programmer K518ISE interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.
2.After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].
3.Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.
4.Click [Install] after updating the kernel file. And the device will reboot to install kernel.
5.Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.
6.The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.
7.Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .
Save power to prolong stand-by time. Auto standby function can prevent the Lonsdor K518ISE from being overheated in hot summer.
source：http://www.obd2tool.com/blog/2018/05/25/how-to-update-lonsdor-k518ise-hibernation-function-and-kernel/
Updated Condition: for all K518 devices with working normally
Updated Content: Added Hibernation function; Kernel update supported
Update Benefit: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in hot summer.
Updated Version: K518 APK V1.5.25
Preparation for Update:
1.Power on the device or keep the battery level over 80%.
2.Make sure wifi network is in good condition and the device receives signal normally
Update steps:
1.Click [One key update] and skip to below Auto Key Programmer K518ISE interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.
2.After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].
3.Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.
4.Click [Install] after updating the kernel file. And the device will reboot to install kernel.
5.Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.
6.The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.
7.Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .
Save power to prolong stand-by time. Auto standby function can prevent the Lonsdor K518ISE from being overheated in hot summer.
source：http://www.obd2tool.com/blog/2018/05/25/how-to-update-lonsdor-k518ise-hibernation-function-and-kernel/
Comments
Post a Comment