Skip to main content

Posts

Showing posts from October, 2018

Testing GM HVAC with Tech2

My HVAC controller was bad. It was not sending commands to operate the actuators. The display was zeros. I bought a new controller and this test shows the commands sent and how the actuators respond. How to test your actuators with GM Tech 2 , this is an oaf i’ve cadillac escalade snares oh five that’s going to be like truck going on a Cadillac. this is the K go down to body I have a navigation radio. This is the auto and you’re wondering what the PHT is it’s a hybrid vehicle very uncommon okay. So now scroll down to eating an air conditioning special functions We’re going to output control motor actuator tests air inlet door this doesn’t have any I’m not sure if this vehicle has them to see the zeros there doesn’t appear to be anything it doesn’t change anything so we’re not gonna do anything with that mode one door position so we we do only hit the on button it’s gonna request a 2:38 so you can watch the steps go up to 2:38 or their bounced There we g...

How to program fobik with wiTECH app

Confirmed!  Chrysler wiTech MicroPod 2 clone is able to do online programming to Chrysler including ECU programming and key adding even when all keys are lost. Here you go. Purpose: Micropod 2 clone programs new key fobik to Chrysler 200 when all keys are lost Car: 2015 Chrysler 200 (The 2015 Chrysler 200, along with other Fiat-based models like the Jeep Renegade, Jeep Cherokee, and Ram Promaster, are all equipped with a rolling PIN Code.) What you need: Locksmith Identification Number (LSID through NASTF) Proper keys to be programmed PIN Code Laptop MicroPOD II good quality clone or the genuine wiTECH diagnostic application Before you begin the programming process, you should the Key Code (key cut code) and Authorized PIN (key programming). VERY VERY VERY IMPORTANT: *   You must be online to program the key with  car diagnostic tool Micropod 2 clone. *   You can pull the PIN Code with OBDSTAR F104 key tool. *   If you input...