Skip to main content

How to install WiTech MicroPod 2 software 17.04.27 on Windows 7?

How to install Chrysler wiTech MicroPod 2 software 17.04.27 on Windows 7?
Step 1: install AdobeAIRInstaller.exe
Step 2: install jre-6u45-windows-i586.exe
Step 3: install wiTECH_Install_17.04.27.exe
Step 4: restart the computer
Pay attention:
The computer date must be set to that day. (The day you install WiTech MicroPod 2 17.04.27)
The computer must be connected to the Internet.
Connect the MicroPod 2 to computer to open the software.
When it pop up registration tips, turn off the software and turn it on  repeatedly then you can use it.
Which MicroPod 2 clone is tested 100% safe to use?
wiTech MicroPod 2
WiTech 17.03.10 OK
WiTech 17.04.27 OK
6-1
Chrysler wiTech MicroPod 2 Best Quality OEM
WiTech 17.03.10 OK
WiTech 17.04.27 Still testing
6-2 6-3
Tips: Difference between Chrysler Micropod II and Chrysler wiTech MicroPod 2 Best Quality OEM
Same: Internet connection OK, Chrysler online programming and diagnosis OK
Different: Chrysler wiTech MicroPod 2 Best Quality OEM is much better than wiTech MicroPod 2’s.
You get what you pay for from Obd2tool.com. Hope it helps my friend!
Labels:

Comments

Post a Comment

Popular posts from this blog

VCDS Release 22.3

VCDS HEX-V2 cable support to work with multilingual VCDS crack software on official website. HEX-V2 Dual-K+CAN USB Interface Compatible with all diagnostic capable VW/Audi cars from 1996 to current, Windows based diagnostic software for VW/Audi/Skoda/Seat etc. VCDS HEX-V2 Cable Overview: Software Version: V22.3.0 Support Language: English, French, German, Chinese, Russian, Italian, Czech, Hungary, Spain, Portugal, Sweden, Netherlands, Russia (Need to use loader to run other languages except English) Vehicle List: For Audi/VW/Skoda/Seat etc System Requirements: Windows 7 or newer VCDS VAG COM HEX-V2 Cable Software Multi-language As Following: EN English PTT Portugal HGJ Hungary FRM French CN Chinese EST Spain ITT Italy DE German ROJ Romania RUS Russian AKP Poland PRI Netherlands NEZ Denmark AER Swedish CZ Czech Notice: if you would like to the newest software version V22.3.0, please download from official website. https://www.ross-tech.com/vcds/download/current.php The VCDS Hex-V2 Cabl
Post a Comment
Read more

How to Choose the Right Clone Tactrix Openport 2.0 J2534

  In this article, we will explain how to get the right clone Tactrix Openport 2.0 J2534 adapter and why Openport 2.0 is better than Mini VCI J2534 interface. Openport 2.0, like its colleagues MVCI 3 in 1 and Mini-VCI, is a J2534-1 compatible adapter and works with any software ( VAG ODIS , Toyota Techstream , etc.) supporting PassThru library/driver. Choosing the right clone There are two clone versions available on the Internet. Adapters differ not only in Golden Pin, best quality (Full Chip or New Version) and Black Pin, Poor Quality (standard version) and the type of sticker but also the board inside. A bad OBD2 clone has a black connector and a green board inside: The correct clone has a transparent OBD2 connector and a black board : https://www.obd2tool.com/goods-10056-Tactrix-Openport-ECUFLASH-Cable-For-Toyota-Jaguar-And-LandRover-Diagnose.html Let’s figure out which chips the correct clone is built on: 1. LPC2364FBD100 – microcontroller: Arm7TDMI-S™ processor,
Post a Comment
Read more

Free Download JLR SDD V155 Diagnostic Software and Patch

Jaguar,  Land Rover Diagnostic Tool software SDD released to newest version 155. Here obd2tool.com provides software & patch free download resource. Version: SDD V155 Year/Release Date: 11.2018 Multi Languages: English, Dutch, Spanish, Italian, Chinese, Korean, German, Portuguese, Russian, French, Japanese Operating system: Windows 7 32-bit (recommended. You are free to try other systems) Supported hardware: JLR mangoose sdd/pro (SP205, SP205-B, SP116), mangoose 3-in-1 cable(SP216-B) Dealer diagnostic for Land Rover Jaguar Works with VCM Rotunda/VCM2, with both original & clone. Da-Dongle J2534 VCI (replaced VCM I) JLR VCI (Jaguar Land Rover approved SAE j2534 Pass-Thru interface) JLR VCI (SP284) JLR DoiP VCI J2534 EUCLEIA wiScan T6 SDD 155_FULL / SDD_155_154_UPDATE NGI_Phase2.5_004.00.005    NGI_Phase2.5_004.01.001  NGI_Phase2.5_004.02.002  NGI_Phase2.5_004.03.002      NGI_Phase3_005.00.004      NGI_Phase3_005.01.003  NGI_Phase3_005.02.001  NGI_Phase3
Post a Comment
Read more