Skip to main content

How to Solve Tactrix Openport 2.0 Light is Not Bright

 

What is Tactrix OpenPort?

The Tactrix OpenPort 2.0 is the newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. ... No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models.

Top 5 Reasons To Get Tactrix Openport 2.0+ECUFLASH

1.Field upgradeable software
2.Standalone datalogs to microSD / microSDHC card without a laptop
3.Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line)
4.Tactrix Openport 2.0 can works for Toyota, Jaguar and LandRover diagnose. The OEM software we have test in TOYOTA ,LOANDROVER and JAGUAR.all work excellent.!!!
5.The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.

How to Solve Tactrix Openport 2.0 Light is Not Bright

Something is wrong with myTactrix Openport 2.0. I plugged it into the computer and it didn't work properly. The light wasn't bright. I tried it on three computers, installed the driver, but it still didn't work. How to deal with it?

The solution offered by Engineer: Check if the light is on after connecting the device to the car. If not, it means something is wrong with the ECU Programmer. You must send it back to your dealer for repair.

Please note: do not update the software from Tactrix Openport 2.0! Otherwise the device will be locked. Once locked, the light will not light up when connecting to the car or the computer.

If you have the high version of the software installed on your computer, you will need to reinstall the system or switch computers and then install Tactrix Openport 2.0 software that comes with the CD to try again.

You have to know:

* It is Copy one made in China, it cannot update online.
* Please disconnect internet! Do not connect to the Internet when you use it otherwise device will damage.
* Computer System Requirement: Windows XP/Win 7 32bits
* Please close anti-virus programmer
* Tactrix Openport 2.0+ cable is related to the computer CPU, you are advised to run with the Intel processor, otherwise the cable will be broken if you use with AMD processor.
* You can’t run Tactrix Openport 2.0+ software together with KTMOBD and KTMflash software, otherwise the cable will be broken.

Labels:

Comments

Post a Comment

Popular posts from this blog

How to Solve VW Amarok Caddy 2018+ Remote Not Working After Programming

Here comes the general problem of VW Amarok Caddy etc. 2018+ UDS protocol vehicles: 2019 VW Caddy. I spent a few hours programming the Xhorse key using VVDI2 . Also tried TDB1000. Remote function could not be obtained. Every time the programming failed, the original remote stopped working until I scanned and cleared errors. I expected it to work when the transponder was added (Megamos AES). I can’t access remote learning with any of my tools, nor did vvdi2 let me program the remote. I was wondering if anyone could confirm remote learning with transponders or how to learn it if not. Solution: It is not possible for BH remote controls after 2018 at the latest. You will not get any communication with the central locking remote control customization. You need a dealer key 100% and then learn from ODIS. There is no after-market solution, VAG blocked the remote channel on UDS vehicles 2018+. Had the exact same issues with new caddies. So merchant key and Odis ATM since the c...
Post a Comment
Read more

John Deere Service Advisor 4.2 CF – Construction & Forestry incl. Hitachi + History DVD 2016

John Deere Service Advisor  4.2 CF – Construction & Forestry incl. Hitachi 2/2016 contains detailed information on all the procedures for repair and maintenance, a lot of illustrations, wiring diagrams, electrical and hydraulic circuits for construction and forestry equipment John Deere. Service Advisor contains information about setting up data, troubleshooting procedures, symptoms of malfunctions, the order of disassembly and assembly, adjustment data, torque. Electronic program is designed to handle all maintenance issues, eliminate breakdowns and malfunctions. Installation of this software is very easy and doesn’t require additional knowledge. The program allows you to quickly and easily find information and solve problems with machinery John Deere. This service advisor is designed to work with Windows XP, 7, 8. This software works under Windows 10 but wasn’t tested with EDL adapter and drivers. This version of Service Advisor has built-in hot...
Post a Comment
Read more

How to get EVAP not ready IM to pass with Tech2

  I’ve been struggling with this for months now and I came across a post of the Cadillac forum where someone mentioned using the GM Tech2 handheld scanner and running the “Evap service bay” test. First you will need the VCX Nano from obd2tool , it comes with the software for Tech2 and  GDS2 emulators and install it on a laptop. The Evap test should be done from a cold start so have everything ready. The reason I failed the Tech2 EVAP test first time was you must keep RPM between 1800-2200 for 8 minutes it was impossible to do that with foot so it failed and i had to wait overnight for a cold start. What i did to fix was I found a piece of wood and placed it between the seat and gas pedal and move the electric seat until RPM is 2000. This worked perfectly I used this when doing brake light testing for inspection as well. *   Have everything set up, I opened hood so it wouldn’t get too hot, connect the VCX Nano to the OBD2 port and your laptop and go to t...
Post a Comment
Read more