Skip to main content

Free Download JLR SDD V155 Diagnostic Software and Patch

Jaguar, Land Rover Diagnostic Tool software SDD released to newest version 155. Here obd2tool.com provides software & patch free download resource.
Version: SDD V155
Year/Release Date: 11.2018
Multi Languages:
English, Dutch, Spanish, Italian, Chinese, Korean, German, Portuguese, Russian, French, Japanese
Operating system: Windows 7 32-bit (recommended. You are free to try other systems)
Supported hardware:
JLR mangoose sdd/pro (SP205, SP205-B, SP116), mangoose 3-in-1 cable(SP216-B)
Dealer diagnostic for Land Rover Jaguar Works with VCM Rotunda/VCM2, with both original & clone.
Da-Dongle J2534 VCI (replaced VCM I)
JLR VCI (Jaguar Land Rover approved SAE j2534 Pass-Thru interface)
JLR VCI (SP284)
JLR DoiP VCI
J2534 EUCLEIA wiScan T6
SDD 155_FULL / SDD_155_154_UPDATE
NGI_Phase2.5_004.00.005    NGI_Phase2.5_004.01.001  NGI_Phase2.5_004.02.002  NGI_Phase2.5_004.03.002      NGI_Phase3_005.00.004      NGI_Phase3_005.01.003  NGI_Phase3_005.02.001  NGI_Phase3_005.03.001     NGI_Phase3_005.04.001 NGI_Phase3_005.05.002   NGI_Phase3_005.06.002      NGI_Phase3_005.07.003        NGI_Phase3_005.08.001        NGI_Phase3_005.09.001
jlr-sdd-v155-software
How to install and activate JLR Mangoose SDD V154 software?
Main procedure:
1. JLR PanasonicScript-Setup does not need to be installed otherwise.  When the installation is complete, the computer is in reboot.
2. Install SDD_155.00_FULL.exe
at the end of the installation of the computer in a reboot.
3. Install all available software updates in numerical order , for example, “SDD 155.01.exe”.
4. Copy the patch to the desktop and launch the patch, wait for the window with confirmation of the successful completion of the procedure .
That’s all. Run the program and begin to use.
Labels:

Comments

Post a Comment

Popular posts from this blog

How to Solve VW Amarok Caddy 2018+ Remote Not Working After Programming

Here comes the general problem of VW Amarok Caddy etc. 2018+ UDS protocol vehicles: 2019 VW Caddy. I spent a few hours programming the Xhorse key using VVDI2 . Also tried TDB1000. Remote function could not be obtained. Every time the programming failed, the original remote stopped working until I scanned and cleared errors. I expected it to work when the transponder was added (Megamos AES). I can’t access remote learning with any of my tools, nor did vvdi2 let me program the remote. I was wondering if anyone could confirm remote learning with transponders or how to learn it if not. Solution: It is not possible for BH remote controls after 2018 at the latest. You will not get any communication with the central locking remote control customization. You need a dealer key 100% and then learn from ODIS. There is no after-market solution, VAG blocked the remote channel on UDS vehicles 2018+. Had the exact same issues with new caddies. So merchant key and Odis ATM since the c...
Post a Comment
Read more

John Deere Service Advisor 4.2 CF – Construction & Forestry incl. Hitachi + History DVD 2016

John Deere Service Advisor  4.2 CF – Construction & Forestry incl. Hitachi 2/2016 contains detailed information on all the procedures for repair and maintenance, a lot of illustrations, wiring diagrams, electrical and hydraulic circuits for construction and forestry equipment John Deere. Service Advisor contains information about setting up data, troubleshooting procedures, symptoms of malfunctions, the order of disassembly and assembly, adjustment data, torque. Electronic program is designed to handle all maintenance issues, eliminate breakdowns and malfunctions. Installation of this software is very easy and doesn’t require additional knowledge. The program allows you to quickly and easily find information and solve problems with machinery John Deere. This service advisor is designed to work with Windows XP, 7, 8. This software works under Windows 10 but wasn’t tested with EDL adapter and drivers. This version of Service Advisor has built-in hot...
Post a Comment
Read more

How to get EVAP not ready IM to pass with Tech2

  I’ve been struggling with this for months now and I came across a post of the Cadillac forum where someone mentioned using the GM Tech2 handheld scanner and running the “Evap service bay” test. First you will need the VCX Nano from obd2tool , it comes with the software for Tech2 and  GDS2 emulators and install it on a laptop. The Evap test should be done from a cold start so have everything ready. The reason I failed the Tech2 EVAP test first time was you must keep RPM between 1800-2200 for 8 minutes it was impossible to do that with foot so it failed and i had to wait overnight for a cold start. What i did to fix was I found a piece of wood and placed it between the seat and gas pedal and move the electric seat until RPM is 2000. This worked perfectly I used this when doing brake light testing for inspection as well. *   Have everything set up, I opened hood so it wouldn’t get too hot, connect the VCX Nano to the OBD2 port and your laptop and go to t...
Post a Comment
Read more