Skip to main content

How to change hard disk format to AHCI

When the GM MDI 2 hard drive format setting is incorrect, it may cause the computer blue screen problem.
Screen as below:

How-to-change-hard-disk-format-to-AHCI-1

“A problem has been detected and windows has been shut down to prevent damage to your computer.”
“Check for viruses on your computer. Remove any newly installed hard drives or hard controller. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/ F to check for hard drive corruption, and then restart your computer.”
Technical information:
STOP: 0x0000007B(0xFFFFF880009A97E8. 0xFFFFFFFFC0000034. 0x0000000000000000. 0x0000000000000000)

So how to solve the hard disk format?
Step1. Restart computer, continuous press F1/F4/F12 button to access bios version.
(*Different computers may need to press different buttons. )
Step2. Continue >> Config >> Serial ATA(SATA) >> SATA Controller Mode Option: AHCI >> Change value to AHCI

How-to-change-hard-disk-format-to-AHCI-2
How-to-change-hard-disk-format-to-AHCI-3
How-to-change-hard-disk-format-to-AHCI-4
How-to-change-hard-disk-format-to-AHCI-5
How-to-change-hard-disk-format-to-AHCI-6

Problem was solved!

Labels:

Comments

Post a Comment

Popular posts from this blog

VCDS Release 22.3

VCDS HEX-V2 cable support to work with multilingual VCDS crack software on official website. HEX-V2 Dual-K+CAN USB Interface Compatible with all diagnostic capable VW/Audi cars from 1996 to current, Windows based diagnostic software for VW/Audi/Skoda/Seat etc. VCDS HEX-V2 Cable Overview: Software Version: V22.3.0 Support Language: English, French, German, Chinese, Russian, Italian, Czech, Hungary, Spain, Portugal, Sweden, Netherlands, Russia (Need to use loader to run other languages except English) Vehicle List: For Audi/VW/Skoda/Seat etc System Requirements: Windows 7 or newer VCDS VAG COM HEX-V2 Cable Software Multi-language As Following: EN English PTT Portugal HGJ Hungary FRM French CN Chinese EST Spain ITT Italy DE German ROJ Romania RUS Russian AKP Poland PRI Netherlands NEZ Denmark AER Swedish CZ Czech Notice: if you would like to the newest software version V22.3.0, please download from official website. https://www.ross-tech.com/vcds/download/current.php The VCDS Hex-V2 Cabl
Post a Comment
Read more

How to Choose the Right Clone Tactrix Openport 2.0 J2534

  In this article, we will explain how to get the right clone Tactrix Openport 2.0 J2534 adapter and why Openport 2.0 is better than Mini VCI J2534 interface. Openport 2.0, like its colleagues MVCI 3 in 1 and Mini-VCI, is a J2534-1 compatible adapter and works with any software ( VAG ODIS , Toyota Techstream , etc.) supporting PassThru library/driver. Choosing the right clone There are two clone versions available on the Internet. Adapters differ not only in Golden Pin, best quality (Full Chip or New Version) and Black Pin, Poor Quality (standard version) and the type of sticker but also the board inside. A bad OBD2 clone has a black connector and a green board inside: The correct clone has a transparent OBD2 connector and a black board : https://www.obd2tool.com/goods-10056-Tactrix-Openport-ECUFLASH-Cable-For-Toyota-Jaguar-And-LandRover-Diagnose.html Let’s figure out which chips the correct clone is built on: 1. LPC2364FBD100 – microcontroller: Arm7TDMI-S™ processor,
Post a Comment
Read more

Free Download JLR SDD V155 Diagnostic Software and Patch

Jaguar,  Land Rover Diagnostic Tool software SDD released to newest version 155. Here obd2tool.com provides software & patch free download resource. Version: SDD V155 Year/Release Date: 11.2018 Multi Languages: English, Dutch, Spanish, Italian, Chinese, Korean, German, Portuguese, Russian, French, Japanese Operating system: Windows 7 32-bit (recommended. You are free to try other systems) Supported hardware: JLR mangoose sdd/pro (SP205, SP205-B, SP116), mangoose 3-in-1 cable(SP216-B) Dealer diagnostic for Land Rover Jaguar Works with VCM Rotunda/VCM2, with both original & clone. Da-Dongle J2534 VCI (replaced VCM I) JLR VCI (Jaguar Land Rover approved SAE j2534 Pass-Thru interface) JLR VCI (SP284) JLR DoiP VCI J2534 EUCLEIA wiScan T6 SDD 155_FULL / SDD_155_154_UPDATE NGI_Phase2.5_004.00.005    NGI_Phase2.5_004.01.001  NGI_Phase2.5_004.02.002  NGI_Phase2.5_004.03.002      NGI_Phase3_005.00.004      NGI_Phase3_005.01.003  NGI_Phase3_005.02.001  NGI_Phase3
Post a Comment
Read more