Skip to main content

Tsla PRO Software Installation & Activation

 

Tsla PRO Software Installation & Activation

System requirements
Operating system: Microsoft Windows 7/8/8.1/10 (32/64 bit)
1 free USB port. 2 or 3.0

Software download
Software is available to download for free from:
Manufacturer website: Distributor’s store:

Download and install:
1.Main software
Tsla PRO (date xx.xx.2019) or newer (RAR archive)
2.Drivers USB Serial Port for TslaPRO Interface:
Drivers for Tsla PRO Interface /CDM20824/ (RAR archive)

in some circumstances you may also need to download and install latest drivers CDM20824 USB D2XX drivers for FT232RL , can be downloaded from

The software is working without installation.
So you can just simply create folder and extract software wherever you want and lunch by clicking on executable file “TslaPRO_pro.exe”

Installation of the license activation file

Before you start working with the mentioned software, you have to activate software using license Tsla PRO .bin file that you will receive on your an email address after shopping.

EXAMPLE:
You will received activation file: Tsla PRO 000000000xxx.rar
To extract a RAR file, you will need:

WinRAR archiver software: https://www.rarlab.com/download.htm or free and open source 7-Zip https://www.7-zip.org/

then after extracting files you need to move/copyTsla PRO .bin file to the directory where is IDMONACT folder

the right path should look as shown in the following:

visualization for better understanding, step by step
C:\Tsla PRO\IDMONACT \ Tsla PRO0000000000xx\Tsla PRO.bin
Tsla-PRO-Software-Installation-&-Activation-1
Tsla-PRO-Software-Installation-&-Activation-2
just drag and drop RAR archive file to IDMONACT folder

Tsla-PRO-Software-Installation-&-Activation-3
Tsla-PRO-Software-Installation-&-Activation-4
Tsla-PRO-Software-Installation-&-Activation-5
Tsla-PRO-Software-Installation-&-Activation-6

now you can connect the PRO to your PC/laptop and
run executable file

Tsla-PRO-Software-Installation-&-Activation-7
Tsla-PRO-Software-Installation-&-Activation-8

The First Test
Please attached Tsla PRO to TESLA car now

Tsla-PRO-Software-Installation-&-Activation-9
Tsla-PRO-Software-Installation-&-Activation-10

The Error shown above says that the connection between the Tsla PRO diagnostic tool and the car is incorrect.
Check if the plug is loose and is properly plugged into the diagnostic socket.

Tsla-PRO-Software-Installation-&-Activation-11

the software is going to be constantly developed, so in the future version you supposed to get more useful information and changes build in

Labels:

Comments

Post a Comment

Popular posts from this blog

How to Solve VW Amarok Caddy 2018+ Remote Not Working After Programming

Here comes the general problem of VW Amarok Caddy etc. 2018+ UDS protocol vehicles: 2019 VW Caddy. I spent a few hours programming the Xhorse key using VVDI2 . Also tried TDB1000. Remote function could not be obtained. Every time the programming failed, the original remote stopped working until I scanned and cleared errors. I expected it to work when the transponder was added (Megamos AES). I can’t access remote learning with any of my tools, nor did vvdi2 let me program the remote. I was wondering if anyone could confirm remote learning with transponders or how to learn it if not. Solution: It is not possible for BH remote controls after 2018 at the latest. You will not get any communication with the central locking remote control customization. You need a dealer key 100% and then learn from ODIS. There is no after-market solution, VAG blocked the remote channel on UDS vehicles 2018+. Had the exact same issues with new caddies. So merchant key and Odis ATM since the c...
Post a Comment
Read more

How to Install Mercedes Benz DTS Monaco 8.16 Software

  This instruction show you the guide on how to install Mercedes Benz DTS Monaco Software . Preparations: Benz DTS Monaco Software Free Download After finish downoading and extract you will get below files Double click DTS-Setup to start installation Then just click default option to continue Click Finish Copy files in the repalce folder to DTS Monaco installation folder replace C:\Program Files(x86)\Softing\Diagnostic Tool Set 8\8.16\bin Then run “DTS Monacon” icon on desktop,it will show you the HWID and ask you to activate Please sent me your HWID to me(sales@obd2tool.com),we will sent you a activate file and license file When you get the xxx.reg file,doulbe click it to register it to your pc,click yes to add it the registy Run DTS Monaco and select “Administrate and manage DTS projects’ Select “System”–>”Add license” Load the License_0000000000000.bin file i sent you before Now your DTS Monaco have activated successfully! DTS Monaco 8.03.12 Softw...
Post a Comment
Read more

How to install TIS2000 TIS2Web GlobalTIS for TECH 2

This is Trollhattan’s contribution for those interested in playing with a Tech 2 Scan Tool , here’s a little info regarding the software requirements once you’ve got your hands on a Tech 2 handset. Firstly, I’m by no means an expert on this having only recently got this up and running myself, but I think that’s the tricky part. I’d welcome comments on where this post can be improved/altered etc. Most of the information is already out there on various boards/forums but it would be nice to try to bring it together for us with a purely Saab interest. For those who don’t know, the Tech 2 unit (handset) can be used to interrogate the various management modules on the car (ECU) to report status, fault codes and perform manual activation and monitoring in the event of fault occurrences/engine management light occurrences. This in itself is incredibly useful, but it is also possible to reprogram modules within the car to change various functions and add or replace faul...
Post a Comment
Read more